CISCO SWITCH C1000-16P-2G-L
$2,016.00
Highlights:
- HARDWARE CONFIGURATION: 16 10/100/1000 Gigabit Ethernet (GbE) PoE+ ports, 2 SFP uplink ports; Compact form factor switch with Power budget of 120W and Perpetual PoE+ support for uninterrupted power to PoE devices even in case of switch reboot
- MANAGEMENT: Manage the switch via the Cisco IOS CLI (command-line interface) and/or intuitive web UI. Centrally monitor and configure up to 8 switches via a Single IP or with any third party network management tool
- SECURITY: Enterprise Class Security which natively supports IPv4/IPv6 FHS Security features such as port security, DHCP snooping, dynamic ARP inspection which can easily be configured using a Single ‘Auto-Secure’ command along with 802.1x support for all connected devices
- Enterprise Class Hardware: Tamper-proof switch designed with the best of Cisco’s trustworthy solutions technologies like HW anchored secure boot and Trust anchor Module to ensure you get an authentic and secure product
Description
NETWORK SWITCH CISCO C1000-16P-2G-L
The Cisco C1000-16P-2G-L switch is a series of Cisco switches. The Cisco Catalyst 1000 Series switches extend the ability to expand purpose-built networks and the innovative hardware and software of the Catalyst 1000 to a broad set of applications. Catalyst 9500 series switches offer simplicity without compromise. Catalyst 1000 switches provide a series of security features that protect the integrity of the hardware as well as the software of all data it receives from the switch.
Cisco® Catalyst® 1000 Series Switches are fixed managed Gigabit Ethernet enterprise-class Layer 2 switches designed for small businesses and branch offices. These are simple, flexible and secure switches ideal for out-of-the-wiring-closet and critical Internet of Things (IoT) deployments. Cisco® Catalyst® 1000 operate on Cisco IOS® Software and support simple device management and network management via a Command-Line Interface (CLI) as well as an on-box web UI. These switches deliver enhanced network security, network reliability, and operational efficiency for small organizations.
The Cisco Catalyst 1000 Series Switches provides these features:
- 8, 16, 24, or 48 Gigabit Ethernet data or PoE+ ports with line-rate forwarding
- 2 or 4 fixed 1 Gigabit Ethernet Small Form-Factor Pluggable (SFP)/RJ 45 Combo uplinks or 4 fixed 0 Gigabit Ethernet Enhanced SFP (SFP+)
uplinks
- Perpetual PoE+ support with a power budget of up to 740W
- CLI and/or intuitive web UI manageability options
- Network monitoring through sampled flow (sFlow)
- Security with 802.1X support for connected devices, Switched Port Analyzer (SPAN), and Bridge Protocol Data Unit (BPDU) Guard
- Compact fanless models available with a depth of less than 13 inches (33 cm)
- Device management support with over-the-air access via Bluetooth, Simple Network Management Protocol (SNMP), RJ-45, or USB console access
- Reliability with a higher Mean Time Between Failures (MTBF) and an enhanced limited lifetime warranty support(E-LLW)
Specifications
- Product Code C1000-16P-2G-L
- Description 16x 10/100/1000 Ethernet PoE+ ports and 120W PoE budget, 2x 1G SFP uplinks
- Gigabit Ethernet ports 16
- Uplink interfaces 2 SFP
- PoE+power budget 120W
- Fanless Y
- Dimensions (WxDxH in inches) 10.56 x 11.69 x 1.73
- CPU ARM v7 800 MHz
- DRAM 512 MB
- Flash memory 256 MB
- Forwarding bandwidth 18 Gbps
- Switching bandwidth 36 Gbps
- Forwarding rate(64—byte L3 packets) 26.78 Mpps
Console ports
- RJ-45 Ethernet 1
- USB mini-B 1
- USB-A port for storage and Bluetooth console 1
Memory and processor
- CPU ARM v7 800 MHz
- DRAM 512 MB
- Flash memory 256 MB
Environmental
- Operating temperature Seal level -5 to 50 deg C*
- Up to 5,000ft (1500 m) -5 to 45 deg C
- Upto 10,000 (3000 m) -5 to 40 deg C
- Operating altitude 10,000 ft (3,000m)
- Operating relative humidity 5% to 90% at 40C
- Storage temperature -13 to 158F (-25 to 70C)
- Storage altitude 15,000 ft (4500m)
- Storage relative humidit 5% to 95% at 65C
Reviews
There are no reviews yet.