CISCO SWITCH C1000-48T-4G-L

Description

NETWORK SWITCH CISCO C1000-48T-4G-L

The Cisco C1000-48T-4G-L switch is a series of Cisco switches. The Cisco Catalyst 1000 Series switches extend the ability to expand purpose-built networks and the innovative hardware and software of the Catalyst 1000 to a broad set of applications. Catalyst 1000 series switches offer simplicity without compromise. Catalyst 1000 switches provide a series of security features that protect the integrity of the hardware as well as the software of all data it receives from the switch.

Cisco® Catalyst® 1000 Series Switches are fixed managed Gigabit Ethernet enterprise-class Layer 2 switches designed for small businesses and branch offices. These are simple, flexible and secure switches ideal for out-of-the-wiring-closet and critical Internet of Things (IoT) deployments. Cisco® Catalyst® 1000 operate on Cisco IOS® Software and support simple device management and network management via a Command-Line Interface (CLI) as well as an on-box web UI. These switches deliver enhanced network security, network reliability, and operational efficiency for small organizations.

The Cisco Catalyst 1000 Series Switches provides these features:

•  8, 16, 24, or 48 Gigabit Ethernet data or PoE+ ports with line-rate forwarding
•  2 or 4 fixed 1 Gigabit Ethernet Small Form-Factor Pluggable (SFP)/RJ 45 Combo uplinks or 4 fixed 0 Gigabit Ethernet Enhanced SFP (SFP+)

uplinks

•  Perpetual PoE+ support with a power budget of up to 740W
•  CLI and/or intuitive web UI manageability options
•  Network monitoring through sampled flow (sFlow)
•  Security with 802.1X support for connected devices, Switched Port Analyzer (SPAN), and Bridge Protocol Data Unit (BPDU) Guard
•  Compact fanless models available with a depth of less than 13 inches (33 cm)
• Device management support with over-the-air access via Bluetooth, Simple Network Management Protocol (SNMP), RJ-45, or USB console access
•  Reliability with a higher Mean Time Between Failures (MTBF) and an enhanced limited lifetime warranty support(E-LLW)

About this item

•  HARDWARE CONFIGURATION: 48 10/100/1000 Gigabit Ethernet ports, 4 SFP+ uplink ports
•  MANAGEMENT: Manage the switch via the Cisco IOS CLI (command-line interface) and/or intuitive web UI. Centrally monitor and configure up to 8 switches via a single IP or with any third-party network management tool
•  SECURITY: Enterprise-class security that natively supports IPv4/IPv6 FHS security features such as port security, DHCP snooping, and dynamic ARP inspection, which can easily be configured using a single “Auto-Secure” command, along with 802.1x support for all connected devices

Specifications

• Console ports
• RJ-45 Ethernet 1
• USB mini-B 1
• USB-A port for storage and Bluetooth console 1
• Memory and processor
• CPU ARM v7 800 MHz
  DRAM 512 MB
  Flash memory 256 MB

Performance

• Forwarding bandwidth 52 Gbps
• Switching bandwidth 104 Gbps
• Forwarding rate(64—byte L3 packets) 77.38 Mpps
• Unicast MAC addresses 16000
• IPv4 unicast direct routes 542
• IPv4 unicast indirect routes 256
• IPv6 unicast direct routes 414
• IPv6 unicast indirect routes 128
• IPv4 static routes 16
• IPv6 static routes 16
• IPv4 multicast routes and IGMP groups 1024
• IPv6 multicast groups 1024
• IPv4/MAC security ACEs 600
• IPv6 security ACEs 600
• Maximum active VLANs 256
• VLAN IDs available 4094
• Maximum STP instances 64
• Maximum SPAN sessions 4
• MTU-L3 packet 9198 bytes
• Jumbo Ethernet frame 10,240 bytes
• Dying Gasp Yes
• MTBF in hours (data) 1,452,667
• MTBF in hours (PoE) 856,329
• MTBF in hours (Full PoE) 856,329